Grundomat Pipe Pulling Tail
GRUNDOMAT Pipe Pulling Tail Pieces are designed to replace the reverse tail piece of a standard GRUNDOMAT pneumatic piercing tool, allowing the tool to accept the spigot end of the pipe being pulled.
This attachment helps contractors pull pipe directly behind the GRUNDOMAT tool during trenchless installation. It is a practical accessory for underground utility work where pipe needs to be installed as the bore is being made.
Each pipe pulling tail piece is sized for a specific GRUNDOMAT model and has a matching outside diameter to support proper fitment with the pipe being pulled.
Available Pipe Pulling Tail Pieces
| Part Number | GRUNDOMAT Model | Tail Piece O.D. |
| GE0450300 | 45 | 1.75 in. |
| GE0650300 | 65 | 2.13 in. |
| GZ0750300 | 75 | 3.00 in. |
| GZ0850300 | 85 | 3.33 in. |
| GE0950300 | 95 & 100 | 3.84 in. |
| GE1100300 | 110 | 4.30 in. |
| GE1300300 | 130 | 5.25 in. |
| GE1450300 | 145 | 6.13 in. |
| GF1600300 | 160 | 6.30 in. |
| GE1800300 | 180 | 7.38 in. |
| GE1800301 | 180 | 8.25 in. |
Features
- Replaces the standard reverse tail piece on GRUNDOMAT tools
- Accepts the spigot end of the pipe being pulled
- Helps pull pipe during trenchless boring operations
- Available for GRUNDOMAT models from 45 through 180
- Designed for underground utility and pipe installation work
Important: When pipe is not being pulled, do not operate the tool with this pipe pulling tail piece installed. Reinstall the tapered reverse tail piece before using the GRUNDOMAT tool for standard boring operation.
GRUNDOMAT Pipe Pulling Tail Pieces are a practical accessory for contractors who need to pull pipe directly behind the boring tool while maintaining proper fitment with compatible GRUNDOMAT models.
Sell Or Trade To Us
We make trades local dealers cannot match