Reamers
The heavy construction of the All-Terrain reamer makes it simply the toughest, most durable flute available on the market today. This tool cuts and pulverizes, and finally forces the remaining pieces into the formation wall. Key features include: constructed from steel plate; product is fully welded; aggressive spiraling flutes allow cuttings, small aggregates and drilling fluids to pass by the...
All Terrain Reamers With Swivel
The heavy construction of the All-Terrain reamer makes it simply the toughest, most durable flute available on the market today. This tool cuts and pulverizes, and finally forces the remaining pieces into the formation wall. Key features include: constructed from steel plate; product is fully welded; aggressive spiraling flutes allow cuttings, small aggregates and drilling fluids to pass by the...
The barrel reamer has a relatively flat face lined with rows of carbide cutters that allow the tool to cut and open the hole slightly larger than the diameter of its solid body. The reamer's cutting teeth overcut the tool body, allowing the slurry to flow past the reamer. Key features are: full diameter compaction; fixed conical carbide cutters for...
With a solid body foundation, the Crusher can be configured with either short-bodied radius top carbide buttons for hard rock up to 25,000 PSI or chisel-top carbide buttons for softer formations. The carbide buttons are precisely located on independent cutting paths to insure maximum contact within the hole. Replaceable fluid ports deliver drilling fluids exactly where needed to insure smooth...
Our cyclone reamer is the undisputed champion in sticky clay. It's success is found in the combination of independent wing groups; steep wing angles; soil shear passages in all wing segments 10" and larger; carbide teeth and hardsurfacing on the wing edges and (replaceable) fluid ports located along the perimeter of the wings. When combined, these features minimize bit balling,...
Available in 3, 4 and 5-wing designs, depending on the diameter of the reamer. This open bodied reamer combines shallow wing angles for smooth cutting and excellent mixing characteristics with a centralizing ring to cause the tool to run true in the hole. Key features include: centralizing ring; large carbide cutters positioned along the length of the wings; leading edges...
Featuring tungsten carbide insert (TCI) bits in either new or premium re-run condition, our hole openers are custom configured to your specifications. You specify tool diameter, number of cones, cone diameter, connections, stabilizers, and shaft length, front and rear. Shaft size: 3" – 6 5/8" Size range: 8" – 36"
A versatile all-in-one tool that cuts, mixes, and packs. Key features include: replaceable fluid ports; carbide tipped lead-in cutters; hardsurfaced mixing paddles; lead-in cutters and mixing paddles overcut the body, providing relief for fluid and cuttings; reversing paddles facilitate pushback. Shaft size: 2" – 4 1/4" Size range: 6" – 20"
Extremely versatile design, providing excellent performance in sands and loams to light shale and sandstone. This compact reamer design combines precise carbide placement and efficient fluid delivery to effectively reduce torque on the drill string, increase productivity, and reduce wear. Key features include: carbide cutters follow independent paths; redundant carbide cutters on wing edges; fluid jets are positioned to effectively...
A versatile all-in-one tool that cuts, mixes, and packs in one easy step. Key features include: large carbide cutters positioned along the length of the body; cutters overcut the body to allow drilling fluid to pass by the reamer to prevent packing off; leading edges of cutters are hardsurfaced; replaceable fluid ports. Shaft size: 2" – 4 1/4" Size range: 6"...
Steep Taper Fly-Cutter Reamers
Available in 3, 4 & 5-wing designs depending on the diameter of the reamer. This open-bodied reamer features steep tapered wings with two rows of large carbide cutters and a heavy-duty centralizing ring for added toughness for use in hard ground and with larger drill rigs. Like our standard Fly-Cutter this tool delivers smooth cutting along with excellent mixing characteristics....
The Tri-Action is designed to cut, pulverize, and finally to force the remaining pieces into the formation wall. Key features are: long tapered compaction style body with three large-relief flutes that allow cuttings, small aggregates and drilling fluid to pass through the body; the leading edge of each flute is hardsurfaced; replaceable jets and carbide cutters maximize performance and tool...