Skip to content
🕘 Mon - Fri / 8 AM - 6 PM EST | SELL TO US |
🕘 Mon - Fri / 9 AM - 6 PM EST | SELL TO US |
Sell your used DigiTrak MFD remote display for cash
Sell your used DigiTrak MFD remote display for cash

Sell DigiTrak MFD Display for Cash

UCG buys used DigiTrak MFD remote displays. The MFD works with compatible Mark III, Mark IV, Mark V, Eclipse, F2, F5, and SE receivers. It is a remote display for the drill rig, not a locator.

Check the model name on the rear label. MFD and FSD displays use similar keypads, so do not identify the model by its buttons alone. Send us photos of the rear label and Information screen so we can verify the model, software version, receiver setting, and telemetry frequency.

We buy the MFD by itself or with available accessories, including:

  • External antenna
  • 14 V battery pack and charger
  • DC power cable
  • Mounting hardware
  • Carrying case

For an initial evaluation, send us:

  • Photos of the front and back
  • A photo of the powered-on screen
  • Photos of the rear label and Information screen
  • A list of included accessories
  • A description of known faults

If possible, check that the display powers on, the screen remains readable, all keypad buttons work, the menu opens, and the startup tone sounds. If you have a compatible receiver, check whether the MFD receives live telemetry. If you do not have a receiver, state that telemetry has not been tested.

Report a cracked or unreadable screen, faulty buttons, speaker problems, damaged antenna or power connectors, corrosion in the battery compartment, intermittent power, or lost telemetry.

The offer depends on the display’s working condition, software and telemetry compatibility, and included accessories. We also buy untested and non-working MFD displays. You do not need to repair or open the unit. Remove the battery from the display before shipment.

We buy DigiTrak MFD remote displays

We buy used DigiTrak MFD remote display units. If you are upgrading your equipment or no longer need your MFD display, you can sell it quickly and easily.

How it works

1. Tell us about your equipment in the contact field above.

Let's see if we are close enough to make a deal. Simply provide us a description of the equipment you would like to sell to us, along with your contact information.

2. Ship your equipment for an evaluation.

If we think you have something we would be interested in, we will contact you to organize shipping your equipment to us. Once we receive your equipment, it will be tested and a value determined.

3. Get paid.

If you accept the offer, we will issue payment to you quickly and easily. If you decide not to accept our offer, we will gladly return it to you at no cost.

We buy DigiTrak MFD displays compatible with the Classic and Falcon series locating systems.