Skip to content
🕘 Mon - Fri / 8 AM - 6 PM EST | SELL TO US |
🕘 Mon - Fri / 9 AM - 6 PM EST | SELL TO US |
Sell your used DigiTrak FSD remote display for cash
Sell your used DigiTrak FSD remote display for cash

Sell DigiTrak FSD Display for Cash

UCG buys DigiTrak F Series Displays (FSD) used with HDD locating systems. The FSD is a remote display installed at the drill rig. It receives telemetry from the locator and shows the operator transmitter depth, pitch, roll, temperature, battery status, predicted depth, and Target Steering data. An FSD does not locate a transmitter by itself.

The FSD can work with DigiTrak F2, F5, SE, Eclipse, Mark Series, and compatible Falcon receivers. The selected receiver model, telemetry channel, and telemetry frequency designation must match the locator. If you do not know which system your display was used with, send a photo of the Information screen and the serial label on the back of the unit.

We buy the FSD display by itself or with available accessories, including:

  • external telemetry antenna;
  • F Series battery pack;
  • battery charger;
  • DC power cable;
  • battery-compartment brace insert;
  • removable sun and rain visor;
  • carrying case.

For an initial evaluation, send us:

  • photos of the front, back, and sides of the display;
  • a photo of the FSD while it is turned on;
  • a photo of the Information screen showing the software version, serial number, and telemetry settings;
  • close-up photos of the screen, keypad, antenna connector, DC power port, and battery compartment;
  • photos of the antenna, battery, charger, cable, visor, and case;
  • a description of missing accessories and known faults.

If possible, check whether the display powers on from both the battery and DC cable. Confirm that the Execute and arrow buttons work, the screen contrast adjusts, and the display stays powered on without restarting. If you have a compatible receiver, check whether the FSD receives live telemetry and displays depth, pitch, roll, temperature, and signal updates. If you cannot test telemetry, mark it as untested.

Report cracked screens, missing pixels, moisture damage, damaged buttons, corroded battery contacts, a broken battery tab, a loose mounting base, damaged adjustment knobs, antenna-connector problems, DC power faults, or intermittent telemetry.

The offer depends on the display’s operating condition, software and telemetry configuration, screen and keypad condition, working power inputs, and included accessories. You can sell an FSD without a receiver, antenna, battery, or charger, but list all missing parts before shipment.

You do not need to repair the display before contacting us. Describe its current condition and send clear photos so we can review the FSD before arranging shipment.

We buy DigiTrak FSD remote displays

We buy used DigiTrak FSD remote display units. If you are upgrading your equipment or no longer need your FSD display, you can sell it quickly and easily.

How it works

1. Tell us about your equipment in the contact field above.

Let's see if we are close enough to make a deal. Simply provide us a description of the equipment you would like to sell to us, along with your contact information.

2. Ship your equipment for an evaluation.

If we think you have something we would be interested in, we will contact you to organize shipping your equipment to us. Once we receive your equipment, it will be tested and a value determined.

3. Get paid.

If you accept the offer, we will issue payment to you quickly and easily. If you decide not to accept our offer, we will gladly return it to you at no cost.

We buy DigiTrak FSD displays compatible with the Classic and Falcon series locating systems.