Skip to content
🕘 Mon - Fri / 8 AM - 6 PM EST | SELL TO US |
🕘 Mon - Fri / 9 AM - 6 PM EST | SELL TO US |
Sell your used DigiTrak F2 locator for cash
Sell your used DigiTrak F2 locator for cash

Sell DigiTrak F2 for Cash

This page is for the classic DigiTrak F2 locating system, not the DigiTrak Falcon F2. Check the model name on the receiver’s startup screen before submitting your equipment. If the screen shows “Falcon F2,” use our Falcon F2 selling page instead.

UCG buys complete DigiTrak F2 systems and individual components, including F2 receivers, F Series transmitters, FSD remote displays, batteries, chargers, and carrying cases. We consider working systems, incomplete kits, untested components, and equipment with known faults.

The classic F2 can use several transmitter types:

  • FS short-range transmitter;
  • FX long-range transmitter at 12 or 19.2 kHz;
  • FXL extended-range transmitter at 12 or 19.2 kHz;
  • FC 12 kHz cable transmitter.

Some F2 receivers support both 12 and 19.2 kHz, while others may have a different configuration. Send a photo of the startup screen and transmitter marking so we can identify the exact version.

For an initial evaluation, send us:

  • photos of the receiver from all sides;
  • a photo of the powered-on startup screen;
  • a photo of the serial label inside the battery compartment;
  • the transmitter model, frequency, and regional designation;
  • photos of the FSD remote display and its serial label;
  • photos of the batteries, charger, case, and other accessories;
  • a description of missing parts, previous repairs, and known faults.

If possible, check whether the receiver passes its startup test, selects the correct transmitter frequency, completes calibration, and displays depth, pitch, roll, temperature, and signal strength. If the kit includes an FSD display, confirm that it receives data from the receiver. Do not mark an untested function as working.

The offer depends on the receiver’s frequency configuration, matching regional and telemetry designations, transmitter model, calibration results, remote-display operation, battery condition, and kit completeness. A complete matched system usually has more value than a receiver sold separately.

You do not need to repair the equipment before contacting us. Describe its current condition and send clear photos so we can review the F2 system before arranging shipment.

We buy DigiTrak F2 locating systems

We buy used DigiTrak F2 equipment, including locators, sondes, and complete HDD kits. If you are upgrading your equipment or no longer need your locator, you can sell your DigiTrak F2 quickly and easily.

How it works

1. Tell us about your equipment in the contact field above.

Let's see if we are close enough to make a deal. Simply provide us a description of the equipment you would like to sell to us, along with your contact information.

2. Ship your equipment for an evaluation.

If we think you have something we would be interested in, we will contact you to organize shipping your equipment to us. Once we receive your equipment, it will be tested and a value determined.

3. Get paid.

If you accept the offer, we will issue payment to you quickly and easily. If you decide not to accept our offer, we will gladly return it to you at no cost.

We buy DigiTrak F2 locators and displays, including sondes.