Used Fujikura FSM-70R+ Fusion Splicer w/CT-30 cleaver. Stock number: FJ70RP
- Used Fujikura 70R+ Ribbon Fusion Splicer
- Used BTR-09 Battery
- Used DCC-18 Battery Charge Cord
- Used ADC-18 AC Adapter
- Used ACC-14 AC Cord
- FH-70-12 Fiber Holder
- CC30 Transit Case
- Used RS02 Thermal Stripper
- Used CT-30 Precision Fiber Cleaver
Apply for financing. Low monthly payments.
We accept trade-ins:
We make trades local dealers cannot match. Trade up, trade down with cash-back, or sell your used equipment. Contact us to see what we can do for you!
We offer 30 day warranty. Take the stress out of buying used equipment.
Next-day delivery within USA:
Avoid downtime. Request one-day delivery and get locating package the next day.
We ship worldwide:
We ship worldwide and offer flexible international shipping rates. We work with the freight forwarder of your choice or help you to choose the most suitable one.
Specifications for splicer:
|Model||FSM-70R+ Fusion Splicer|
|Applicable Fibers||Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)|
|Fiber Count||Single, 2, 4, 5, 6, 8, 10, 12|
|Cladding Diameter||125 µm|
|Coating Diameter||Ribbon: 0.25 mm to 0.4 mm, Single: 250 µm and 900 µm|
|Fiber Cleave Length||10 mm|
|Typical Average Splice Loss||0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T standards|
|Splicing Time||Typical 15 seconds with standard single-mode fiber|
|Arc Calibration Method||Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available|
|Splicing Modes||100 preset and user programmable modes|
|Splice Loss Estimate||Based upon dual camera cladding alignment data|
|Storage of Splice Result||Last 2000 splice results stored in the internal memory|
|Fiber Display||X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation|
|Magnification||35X to 90X|
|Viewing Method||Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating|
|Operating Condition||0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively|
|Mechanical Proof Test||1.96 to 2.25 N|
|Tube Heater||Built-in tube heater with 30 heating modes; auto-start function|
|Tube Heating Time||Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves|
|Protection Sleeve Length||60 mm, 40 mm, Micro|
|Splice/Heat Cycles with Battery||Typical 110 cycles with power save functions activated|
|Electrode Life||1,500 Arc Discharges|
|Power Supply||Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery|
|Terminals||USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for RS02/RS03|
|Wind Protection||Maximum wind velocity of 15m/s (34 mph)|
|Dimensions||146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)|
|Weight||2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery|
* In Good Condition.
Used Fujikura FSM-70R+ Fusion Splicer w/CT-30 cleaver. In stock, and job ready.
Stock number: FJ70RP
Order Now By Phone Call: 727-492-6587
We make trades local dealers cannot match